Change a Propane Tank
Propane fueled forklifts are frequently utilized inside warehouses. The lift truck is made with the propane tank mounted behind the operator. The tanks, which look much like beer kegs, need to be replaced periodically because they have a limited lifespan. Drivers of forklifts should always use caution when handling propane tanks. Compressed gases are hazardous, particularly since the gas is flammable. Always utilize care when removing and replacing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn off the tank valve. The forklift must be left on until the engine dies. This procedure burns off the gas inside the transfer hose that connects the engine and the tank. Prior to taking the second steps, put on the proper safety equipment, such as insulated gloves made of either neoprene or leather. It is important for you to protect your skin from contact with the compressed gas, which is extremely cold.
2 The tank hose needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reattach the hose at the valve of the tank.
3 Leaks could be checked just by applying soapy water to the valve and slightly opening it. If there is a leak, it would cause bubbles to foam from around the valve. If this occurs, check the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks around the area of the valve, and after that perform the leak checking process again. Persistent leaks mean that the nut and connecting hose will have to be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank must be replaced.
4 Finally, open the valve all the way to allow the gas to fill the connecting hose. After that you could start the forklift and continue working.