Most of the time, businesses will spend a lot of money to buy their lift trucks. It is essential, therefore to take proper care of your equipment to protect your investment into the long run. It is a great idea to know the procedures which are undertaken in the maintenance and care of this piece of machinery.
Amongst the best ways to tell how good the engine is working is by starting the lift truck up and listening carefully to see how it runs. For instance, if there are any knocks or misses, the machinery is faulty and this must raise some issues. Additionally listen carefully for any squealing noise that come from the belts because these sounds will provide you with a wealth of information.
Several of the main components requiring attention during maintenance consist of the gauges, horn, safety warning devices, the lights and the overhead guard. Any burnt out light bulbs or faulty parts have to be replaced as soon as they are noticed. It is also vital to check the wiring.
When the above components have been inspected carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery should be checked in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change has been carried out and new filters have been fitted, visually inspect the drive axle from beneath the equipment. Be certain to grease the axle if there is any grease fitting. Inspect the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. After that, inspect each and every other component of the machine including the wheels. If any kind of issue or fault is detected, be certain to address it immediately so as to make sure the machine is running at its safest and optimum levels.